Narex Chisels Review: Months of Real Bench Use
A working woodworker's notes on six months of paring, chopping and sharpening with a six piece bevel edge set.
A retired restoration carpenter on what forty years of fighting cheap chisels taught him, and why six sizes in a wooden box finally ended the argument.
A working woodworker's notes on six months of paring, chopping and sharpening with a six piece bevel edge set.
Two bench chisels, two different jobs. One comes as a set of six and asks for an evening of setup. The other you can buy singly this afternoon. Here is how I split them on my own bench.
Ten practical reasons a chisel earns its place on a hand-tool bench, from hinge mortises to figured wood, plus the sizes that actually get used.
A retired restoration carpenter on what forty years of fighting cheap chisels taught him, and why six sizes in a wooden box finally ended the argument.
A tight joint is normal. Forcing it is the mistake. Here is the paring sequence I use on the bench, from honing the edge to the last test fit.
Three years of weekend work on one bench, six chisels, and the parts of this set the enthusiastic write-ups leave out.
A retired carpenter's notes on the Jorgensen No.60-1/2 after months of chamfers, end grain and plug trimming on a hard maple bench in a New Hampshire garage shop.
One is a knob-adjusted tool you can hand a beginner on his first evening. The other is a blade fitted to a wooden body over a season. I keep both on the bench and I reach for them on different days.
Ten practical reasons a small low angle plane earns its place on the bench, from a carpenter who has carried one for thirty years.
A retired restoration carpenter on why one small plane earned a permanent spot on the bench, and the two things he would still change about it.
End grain tears when the blade levers the fibers instead of slicing them. Five steps, one sharp iron, and a chamfer you should not skip.
Eight months on the bench with the Jorgensen No.60-1/2, including the parts the five-star write-ups leave out.
A 9.5 inch double-edge pull saw, used on oak, maple and poplar for months at the bench. What it does well, what it will not do, and who should own one.
One cuts on the pull with a plate thin enough to flex. The other carries a spine and cuts on the push. Six months of keeping both on the bench, and where each one actually earns its spot.
A pull saw is a different way of cutting, not just a differently shaped saw. Ten practical reasons it earns bench space, from a shop that still cuts joinery by hand.
A retired restoration carpenter on the pull saw that sat in a drawer for two years before it earned a nail behind the bench.
A ryoba is not a western saw with the teeth on backwards. Here is the order I work in, and why the first inch of the cut decides the joint.
Six years of bench use, and the parts of the story the short videos leave out: the thin plate that cuts so well, the kink that ends a blade, and the two or three weeks it takes to unlearn a push stroke.
Six months, roughly forty sharpening sessions, and one drawknife that had been dull since the nineties. What the two-sided King stone does well, and the two habits it demands from you.
One is a stone, one is a steel plate with grit glued to it, and they solve two different halves of the same problem. Here is which one to buy first, and why the order matters more than the brand.
A working woodworker's case for the humble water stone, from a shop with one bench and a wood stove.
A retired carpenter on why the back of the iron matters more than the bevel, and how one combination stone ended a long argument with his chisels.
One stone, two grits, and a method you can repeat. Notes from thirty years of taking edges to the same block by the window.
Every sharpening video puts this stone on the bench. Here is what it does well, where it fights you, and why the 1000 side dishes sooner than anyone mentions.
A retired restoration carpenter's notes on eight months with a wheel gauge: what the graduations buy you, where the fence earns its keep, and the one habit you have to change.
A wheel gauge and a pencil do two different jobs. After a season of using both on the same bench, here is where each one actually earns its keep.
A pin gauge scars the wood and wanders across the grain. A small hardened wheel does the same job and leaves a line you can actually saw to. Here is what changed on my bench.
Thirty years of cutting joinery by hand, and I still marked drawer sides with a pencil. Here is the small tool that finally broke the habit.
The baseline is where a dovetail is won or lost, and a pencil puts you behind before the saw ever touches wood. Here is the order I mark in at the bench.
Two winters of daily use on boxes, frames and one stubborn sash repair. The wheel gauge does one job better than anything else on my bench, and the listings do not tell you which job that is.
A working woodworker's notes on six months of paring, chopping and sharpening with a six piece bevel edge set.
Three years of weekend work on one bench, six chisels, and the parts of this set the enthusiastic write-ups leave out.
A retired carpenter's notes on the Jorgensen No.60-1/2 after months of chamfers, end grain and plug trimming on a hard maple bench in a New Hampshire garage shop.
Eight months on the bench with the Jorgensen No.60-1/2, including the parts the five-star write-ups leave out.
A 9.5 inch double-edge pull saw, used on oak, maple and poplar for months at the bench. What it does well, what it will not do, and who should own one.
Six years of bench use, and the parts of the story the short videos leave out: the thin plate that cuts so well, the kink that ends a blade, and the two or three weeks it takes to unlearn a push stroke.
Six months, roughly forty sharpening sessions, and one drawknife that had been dull since the nineties. What the two-sided King stone does well, and the two habits it demands from you.
Every sharpening video puts this stone on the bench. Here is what it does well, where it fights you, and why the 1000 side dishes sooner than anyone mentions.
A retired restoration carpenter's notes on eight months with a wheel gauge: what the graduations buy you, where the fence earns its keep, and the one habit you have to change.
Two winters of daily use on boxes, frames and one stubborn sash repair. The wheel gauge does one job better than anything else on my bench, and the listings do not tell you which job that is.